Research Status Of Quantum Dot Materials And Their Applications in The Field Of Photoluminescence And Electroluminescence
Oct 05, 2021
Following the discovery of many new physical phenomena of semiconductor nanocrystals [1-5], many potential applications using quantum dots (QD) have been discovered. Due to the quantum confinement effect and quantum size effect, semiconductor quantum dots have the characteristics of wide excitation spectrum, narrow half-width, adjustable wavelength and solution processing, etc., which have received extensive attention [6-9]. After more than 30 years of development, quantum dot materials have achieved a "green synthesis route", and their performance has gradually improved, enabling the production and supply of industrialized products. Currently, photoluminescent devices for commercial applications have been developed, and this series of devices have been used in LED lighting. And display field [10-12]. Especially in the display field, quantum dots such as cdse have extremely narrow line widths, high color saturation, and strong color reproduction capabilities for objects, which can reach more than 120% of the ntsc color gamut [13,14], causing most TVs in the world Sought after by manufacturers and mobile phone screen suppliers. Since SONY released the first quantum dot TV in 2013, companies such as TCL, Samsung, LG and Nanojing Technology have released several quantum dot products, covering many fields such as TVs, mobile phones, and computer monitors [15,16]. At the 2018 CES exhibition in the United States, TCL, Hisense and other companies pushed for quantum dot display technology, which will surely promote the further development and growth of quantum dot display. It is estimated that in 2025, quantum dot displays can occupy more than 30% of the market [17].
This review focuses on the application of quantum dots to photoluminescence and electroluminescence applications of high-color quality lighting and display technologies. The development of quantum dots has entered the stage of commercial application from the initial lighting to today's photoluminescence high color gamut display backlight. In the next stage, it can be imagined that the gradual reduction in the cost of quantum dots, the large-scale synthesis, and the efforts made by manufacturers such as QD Vision, Samsung, and LG in quantum dot electroluminescence, will further promote the large-area electricity of quantum dots. Commercialization of electroluminescent devices.
2. Colloidal quantum dots
Colloidal quantum dots usually refer to nano-sized crystals synthesized and processed in solution [18], which can be uniformly dispersed in the solution. The surface of the quantum dots is covered with a layer of organic ligands, and the ligands are connected by coordination bonds. To the surface of the quantum dot. The most common quantum dots are semiconductor nanoparticles composed of II-VII group (cdse, cds, Znse, cds, Pbs, Pbse), III-VI group (InP, InAs) or I-III-VII group (cuIns2, AgIns2). By combining different elements and ligands in the synthesis, quantum dots with different morphologies and properties can be obtained [19,20].
Due to the quantum size effect and quantum confinement effect, by simply adjusting the size of the prepared quantum dots, the spectrum can cover all wavelengths from blue to near-infrared [21-23]. For example, cadmium selenide quantum dots, when the synthetic particle size increases from 2nm to 8nm, under ultraviolet light, its color can transition from blue to red [24]. At present, cadmium-based quantum dots have proved to have excellent performance [25], and quantum dots composed of cadmium, zinc, selenium, sulfur and other elements have entered the application stage. At the same time, cadmium-free quantum dots such as InP [26] are also in the process of research; perovskite quantum dots are also currently a popular research system, but the stability of perovskite quantum dots is still a problem. This review focuses on colloidal semiconductor quantum dots.
2.1. Development of quantum dot synthesis
The synthesis of quantum dots has played a decisive role in the development of quantum dots. Only stable and reliable quantum dots can be obtained to lay the foundation for research and industrial applications. According to the synthesis system of quantum dots, it is divided into water phase and oil phase system, but the stability of the quantum dots synthesized in the water phase is poor, the quantum yield is low, the size distribution is wide, and it is easy to agglomerate and precipitate, and has been gradually eliminated [27]. In the oil phase system, usually including in the organic high boiling point solvent at a temperature of 120-360°C, the precursor reacts to form the nuclei of quantum dots and stops the growth by subsequent cooling [25,28,29]. In 2001, Peng [29] and others successfully prepared high-quality cdse, cds, and cdte quantum dots using cadmium oxide, which has low toxicity and reactivity. Then in 2002, a non-coordinating solvent system [30] was proposed, which is currently the most used system. The wide octadecene system, this low-melting, high-boiling solution, successfully prepared cds quantum dots in an Ar atmosphere. This synthesis system does not need to be reacted in an anhydrous environment, and the reaction is mild, the quality of the crystal nucleus is easy to control, the experiment reproducibility is good, the preparation process is simplified, and it is known as the "green synthesis route". It is now academically and industrially They are all synthesized using this method.
In the past 10 years, the micro-reaction method has also been improved. This method can be used to produce nanocrystals on a large scale and have good control over physical and chemical properties. Due to the increase in the controllability of the reactor, the integration of sensors that can be analyzed in real time in each process step and the optimization of the algorithm to increase the output have made this improvement possible [31,32]. Nanocrystalline colloids have been successfully synthesized in microreactors, such as cdte, cdse, InP[33,34], and even cdse/Zns and Znse/Zns core/shell quantum dots [35]. Although the microreactor method can replace batch synthesis, additional improvements are needed to synthesize nanocrystals with more complex compositions, shapes, and controllable fluorescence properties.
Figure 1 The development history of quantum dots
2.2. Quantum dot structure design and optimization
Quantum dots are small in size and have a large specific surface area. Depending on their size, ~10% -80% of all their atoms are located on the surface, leaving only partial distribution sites. These unsaturated surface dangling bonds act as effective charge traps, which can greatly reduce the quantum yield, and can easily react with oxygen and become unstable [36]. The first strategy to saturate these dangling bonds is through organic passivation. In this process, suitable organic ligands can be used as the coordination of surface atoms and can also improve the solubility of quantum dots in a given solvent. Typical ligands include trioctyl phosphine (toP), trioctyl phosphine oxide (toPo), oleic acid (oA) and various fatty amines (such as oleylamine, octylamine, etc.) [37,38]. By using these surface ligands, the low quantum yield of unpassivated quantum dots (usually <1%) can be partially increased to between 1% and 50%. [39]
A more general solution to overcome the instability of the core is to epitaxially grow an inorganic shell layer around the core. Depending on how the edges of the conduction band (cB) and valence band (VB) of the bulk material are aligned with respect to the core-shell, the specific choice of core and shell materials can determine different electronic structures and thus have different fluorescence characteristics. Through the preparation of different inorganic core/shell heterostructures, the spatial distribution of electrons and holes in quantum dots can be precisely controlled to provide the required modulation of optical, electronic and chemical properties to adapt to a wide range of potentials. Bawendi [38] and Alivisatos [40] reported detailed studies on the growth of cdse/Zns and cdse/cds, highlighting the influence of shell composition and thickness on carrier delocalization, and proposed important interface core/shell lattices strain. Among all the synthetic methods used to grow core/shell quantum dots, the continuous ion layer adsorption and reaction (sILAR) scheme developed by Li[41] et al. has always been the most common. However, since the sILAR procedure is usually time-consuming and complicated, quantum dots prepared by the "one-pot method" also have high quantum yields. The microwave-assisted synthesis of cdse/cds/cdZns core/multi-shell quantum dots [42] has high luminescence and excellent stability. This method presents some advantages in injection-based synthesis, such as the activation selectivity of precursors, high batch-to-batch reproducibility, and nearly continuous nanocrystal production. Another "one-pot method" is used to prepare the CDS/ZNS shell layer with gradient growth outside the CDSE core. Due to the controlled crystal interface between the two shell layers at a high temperature of 310°C, it has about 90% of the quantum Yield [43].
However, the core and shell materials usually have different lattice parameters; therefore, structural defects prone to appear at the core-shell interface provide a non-radiative attenuation channel, and this structure will also reduce the quantum yield of quantum dots. Therefore, in addition to considering the electronic structure of the material itself, the shell must be appropriately adjusted for the minimum lattice mismatch between the core and the shell to avoid structural defects [44]. In order to solve this problem, a feasible method is to use alloy or gradient shell layer as a buffer layer. In this structure, a graded alloy layer that gradually changes from one material to another is used to relieve strain caused by lattice mismatch. In 2005, high-brightness CDSE / CDS / Zn0.5cd0.5s / ZNS multi-shell quantum dots were synthesized for the first time [45], and this concept was proposed. By gradually changing the alloy layer between the ZNS which has a larger lattice mismatch with the CDS, a higher quantum yield is obtained. This concept is widely applicable in various quantum dot materials. In addition, this gradient alloy can effectively inhibit non-radiative Auger recombination. In addition to engineering different shells with different lattice parameters for electroluminescence, the gradient alloy layer can also reduce non-radiative Auger recombination. To improve the decay rate, thereby improving the external quantum efficiency of electroluminescence [46].
3. Photoluminescence applications of quantum dots
With the continuous optimization of synthesis methods, structural design and the gradual improvement of quantum dot performance, the research and commercialization of photoluminescence quantum dot devices are also constantly being carried out [47-50]. The two applications of photoluminescence are mainly the high color rendering index lighting application using the full-spectrum coverage of the visible light of the quantum dots and the application of the display backlight using the narrow emission bandwidth.
Figure 2 The advantages of quantum dots in (a) display and (b) lighting
3.1. High color rendering index solid state lighting devices
Traditional white light solid-state lighting devices are often composed of GAN light-emitting diodes and YAG:CE yellow rare earth phosphors [51], but this white light LED often shows high color temperature distribution (CCT>5000K) and low color rendering index (CRI). <70) fwhm="">60nm) and this loss cannot be avoided. In contrast, the tunability of quantum dots in the visible light spectrum allows for more controllable color combinations, and the half-width of the spectrum is relatively narrow (FWHM=~30nm), which can generate higher-quality white light with a precisely customized spectrum (cRI> 90) [55]. In 2008, Nizamoglu et al. [56] studied the mechanism by which CDSE/ZNS quantum dots can emit red and green light, and for the first time encapsulated the quantum dots in a blue LED chip to obtain white light. This hybrid structure of quantum dots is one of the early methods of using blue LEDs to generate high-quality white light. The earliest commercial application of quantum dots was in solid-state lighting; in 2010, QD Vision in the United States and China’s Nanojing Technology introduced quantum dot cooling-to-warming devices and applied them to LED lighting products.
One way to use quantum dots to prepare solid-state lighting devices with high color rendering index is to use phosphors and quantum dots to blend, and use the excellent red light spectrum of quantum dots to compensate for the spectrum of phosphors, so as to achieve high color rendering index white light emission . chung[57] mixed red light cdse/Znse core/shell quantum dots into the above YAG:ce phosphor and packaged it in the LED, which can increase the color rendering index to 92; siffalovic[58] etc. use cdse/Znse quantum dots Blended with phosphors and made into a thin film, the color rendering index of the packaged white light device reached 92; Xie [59] et al. optimized the structure of quantum dots and phosphors and encapsulated the phosphor layer on the quantum dot film to improve the lumen efficiency To 110lm/W and the color rendering index reached 90.
Another method is to take advantage of the tunable spectrum of quantum dots and use quantum dots with different emission peaks for packaging. Lee [60] et al. remotely encapsulated red and green light-emitting InP quantum dots, the white light color coordinates of which can reach (0.27, 0.23); shin [61] et al. used air gaps to encapsulate quantum dots on LED chips dripped with silicone resin. The color rendering index reached 81; Lin [62] et al. mixed quantum dots of different colors of cdse/Zns on a flexible substrate and used an ultraviolet light source as the excitation light, and the highest color rendering index reached 96.
In addition, the introduction of optically active doped ions into the quantum dots can introduce impurity emission peaks in the emission spectrum of the quantum dots, which can be combined with other emitted light to form white light. This is the principle of using doped ions to emit light to prepare white light LEDs. . Compared with non-doped quantum dots, the impurity peak is red-shifted relative to the band-edge emission peak of the host, which increases the Stokes shift, thereby reducing the influence of quantum dot self-absorption; at the same time, compared with doped luminescent materials Because non-doped materials have higher photochemical and thermal stability [63]. According to literature reports, white LEDs prepared by doped ion emission can be roughly divided into three categories: Mn2+ doping, cu2+ doping, and Mn2+ and cu2+ co-doping. Xu[64] et al. synthesized cds/Zns quantum dots doped with Mn2+ ions by the "flash" method, and packaged white LEDs with YAG:ce phosphors, and its color rendering index reached 80; Wang[65] Et al. synthesized cds/Zns quantum dots doped with cu2+ ions, which improved the fluorescence in the red band, with a color rendering index of 86; Wang [66] et al. doped Mn2+ in the Znse core and cu2+ in the Zns shell. , Making it show double-peak emission, the packaged white light device reaches 95, and the lumen efficiency is 73.2lm/W, which has a higher prospect.







