LED Ultra-thin Downlight Used For Half A Year, Why The Light Guide Plate Diffuser Will Catch Fire

Oct 11, 2021

The panel light diffuser refers to the scattering phenomenon caused by the light passing through other media in the process of advancing. As long as the light of two different media goes from A to B, it will cause the light to penetrate or reflect or be reflected or obstructed by the refractive index or interference material. Absorbing and penetrating parts will cause dispersion and so-called light diffusion. There are three physical phenomena.

The light guide plate of the panel light uses optical grade acrylic/PC sheet, and then uses high-tech materials with high reflectivity and non-light absorption, and uses UV screen printing technology to print the light guide on the bottom surface of the optical grade acrylic sheet. point. The optical grade acrylic sheet is used to absorb the light emitted from the lamp and stays on the surface of the optical grade acrylic sheet. When the light hits each light guide point, the reflected light will diffuse in all angles, and then destroy the reflection conditions. The light guide plate Shot from the front. Through a variety of sparse and dense light guide points of different sizes, the light guide plate can emit light uniformly. The purpose of the reflective sheet is to reflect the light exposed on the bottom surface back into the light guide plate to improve the efficiency of light use. Functional differences:

The main functions of the diffuser are:

1. Disperse the luminous flux and make the light evenly distributed (some composite diffusers can also control the exit angle in addition to homogenizing the light)

2. Support the backlight structure to protect the optical materials below from damage

The main functions of the light guide plate are:

1. Guide the luminous flux of the point light source of the LED panel light to be evenly distributed across the entire surface. Its key role is to guide the distribution of light.

2.Using the reflection mechanism to more efficiently use the luminous flux and control the light distribution.

Differences in application areas:

1. Acrylic light guide plate is suitable for LED lighting fixtures with direct light sources, such as grille lights and high-end aluminum lights.

2. PC diffuser plate is suitable for side-source LED lighting fixtures, such as flat panel lights, professional film viewers, and is usually used with light guide plates

3. PS diffuser is mainly used for some low-grade ordinary LED lights.


You Might Also Like