How to use a vacuum laminator to fit a cold screen

First of all, let's talk about the cold screen. Maybe many people have heard it and done it, but in the concept, it refers to the LED screen, which means that there is no backlight, the screen itself has self-illumination, and the popular point refers to the Samsung screen. How to use a vacuum laminator to fit this type of screen?

  Here's how to fit this kind of screen. The most popular applications are not Samsung mobile phones, and oppo, vivo and other mobile phones in the domestic series. These kinds of screens are difficult to be framed and difficult to fit in front of everyone. Let's talk about the middle frame. The middle frame of this kind of screen inherits the excellent workmanship of the domestic mobile phone. The middle frame does not stick well, and the middle frame is not difficult. The adhesive between the screen and the middle frame is also The headaches of major mobile phone repairers.

  After the completion of the split box, the following will say the separation cover, although this part is very simple in a small part of the eye, but in the eyes of most mobile phone repairers still have some difficulty, many in the separation process It is not the polarization of the screen, or the layering of the screen when the screen is separated, or the screen leakage, etc., other kinds of phenomena are caused by the lack of understanding of the screen structure, first in the demolition box When the sealant remains on the cover, the residual glue needs to be removed, otherwise the residual glue directly raises the wire, so that it is easy to be polarized.

  Secondly, on the edge of the screen of most mobile phones, there will be a layer of glue. Although this layer of glue is only a little bit, it will directly affect the position where the wire is separated from the line. If the luck is good, it will be polarized, and the luck will be bad. The screen will be broken. This kind of screen needs to be observed while doing the screen, and develop a good habit. When doing it, the screen glue will be removed first, and then separated. This kind of screen is more like vivo.

 Therefore, when using a vacuum laminating machine, you need to pay attention to the structural problems of the screen, and fully understand the structure of the screen, and then you will be better at the screen.