Trends in Backlighting As A Core Component Of Light Guide Panel

May 26, 2022

     Backlight as one of the core components of LCD light guide products is bound to need to cooperate with this development trend, committed to improve the diversity of products and lightweight. Automotive LOGO guide plate combined with different acrylic materials, different ways of use, both uniform and unified laser dot layout, but also according to the different specifications and use of different ways, do different sizes of dot layout. To do a perfect unity of common use and specificity. Non-standard circular lithography is the process of coating a flat silicon wafer with a layer of corrosion-resistant photoresist and then allowing strong light to pass through the photolithography plate, where it is selectively exposed according to the graphic information of the specific layer produced; the photoresist is then removed after development, leaving a film with a micrographic structure on the surface of the silicon wafer. The surface roughness of light guides made by photolithography is poor and the loss of light energy is relatively high. Refrigerator light guide plate can use any light source, point line light source to do surface light source conversion, light source including LEDCCFL (cold cathode lamp tube), fluorescent tubes, etc.

TV back white plate

 Backlight guide light panels.

   The core technology of the backlight module is the optical technology of the light guide plate... Light guide plates are available in both printed and injection moulded... Others, such as injection moulding and printing, laser dots, etching, etc. Due to its low cost, the printed form has long been the mainstream technology, but not high qualified products have been its main drawback, and LCD products require more accurate light guide plate structure, injection molding light guide plate must become the mainstream of backlight development, but the corresponding mold technology problems can only be overcome in a few large factories in Japan.


Backlight guide plate brightness.

  LCD has been on the backlight luminous brightness requirements are very high, but high brightness also makes LCD power consumption remains high, backlight as LCD module in the most power-consuming accessories, has not adapted to the requirements of portable information products, so in the case of no increase in power consumption to improve the backlight brightness and thus increase L the most power-consuming accessories, has not adapted to the requirements of portable products, so in the case of no increase in power consumption to improve Increasing the backlight brightness and thus the LCD brightness is also one of the main trends. The current goal is to achieve a flat panel fluorescent lamp with a brightness of 500-700 cd/m2 and a lifetime of 100,000 hours.


You Might Also Like