The Application Of RGB Light-emitting Board, The Principle And Application Of Rgb

Oct 01, 2021

As a professional term that we often encounter in daily life, rgb is one of the most widely used color systems. It not only plays an extremely important role in programming, but also plays an important role in other fields. So let’s not let go, let’s take a look at several aspects of rgb together with the editor. We will introduce in detail the knowledge of the three sections of rgb's introduction, application and principle. I hope that the relevant text and picture content in the following pages can be correct Everyone is helpful.

1. Introduction of rgb

The RGB color mode is a color standard in the industry. It obtains a variety of colors by changing the three color channels of red (R), green (G), and blue (B) and superimposing them with each other. Yes, RGB is the color representing the three channels of red, green, and blue. This standard includes almost all the colors that human vision can perceive, and it is one of the most widely used color systems at present.

Second, the principle of rgb

RGB is designed based on the principle of color luminescence. In layman's terms, its color mixing method is like three lights of red, green and blue. When their lights are superimposed on each other, the colors are mixed, but the brightness is equal to The sum of the brightness of the two, the more mixed the higher the brightness, that is, additive mixing.

Colored light can be diluted and brightened by colorless light. If blue light meets white light, the result is a brighter light blue light. After knowing its mixing principle, it is easy to understand the color setting in the software.

The superposition of the red, green, and blue lights, the brightest superposition area of the three colors in the center is white, and the characteristic of additive mixing: the more superimposed, the brighter.

Each of the three color channels of red, green and blue is divided into 255 levels of brightness. At 0, the "light" is the weakest-it is turned off, and at 255, the "light" is the brightest. When the three color values are the same, it is a colorless grayscale color, and when the three colors are all 255, it is the brightest white, and when the three colors are all 0, it is black.

RGB colors are called additive colors because you can produce white by adding R, G, and B together (that is, all light is reflected back to the eye). Additive colors are used in illuminating lights, televisions, and computer monitors. For example, displays produce colors by emitting light from red, green, and blue phosphors. Most of the visible spectrum can be expressed as a mixture of red, green, and blue (RGB) light in different proportions and intensities. If these colors overlap, cyan, magenta, and yellow are produced.

Three, the application of rgb

Most of the current monitors adopt the RGB color standard.

On the display, colors are generated by hitting the red, green, and blue light-emitting poles of the screen with an electron gun. Current computers can generally display 32-bit colors, with more than 10 million colors.

All the colors on the computer screen are composed of the red, green and blue colors mixed in different proportions. A group of red, green and blue is the smallest display unit. Any color on the screen can be recorded and expressed by a set of RGB values.

Therefore, the red, green and blue are also called the three primary colors, which are R (red), G (green), and B (blue) in English.

In computers, the so-called "how much" of RGB refers to the brightness, and it is represented by integers. Under normal circumstances, RGB each has 256 levels of brightness, which are represented by numbers from 0, 1, 2... to 255. Note that although the highest number is 255, 0 is also one of the numbers, so there are 256 levels in total. Just like the 11 years from 2000 to 2010.

According to calculations, 256-level RGB colors can combine a total of about 16.78 million colors, that is, 256×256×256=16777216. It is often referred to simply as 16 million colors or tens of millions of colors. Also called 24-bit color (2 to the 24th power).

In the field of leds, three-in-one dot-array full-color technology is used, that is, full-color pixels are composed of RGB three-color chips in a light-emitting unit. As this technology continues to mature, LED display technology will bring people a richer and more true color experience.


You Might Also Like