The Acrylic Guide Plate Should Pay Attention To When It Is Used
Jul 03, 2017
The Acrylic Guide Plate should pay attention to when it is used
Yakeli is made from poly (methyl acrylic cresol, it contains polar side methyl, has strong hygroscopicity etc, bibulous rate is not high, the stored acrylic must keep the environment is dry, need to dry condition is drying under 78 ° c to 80 ° c 5 to 6 h.
1, ordinary acrylic plate thermal deformation stability probably around 100 degrees, so in the use of organic glass products have to pay attention to the temperature, best if at the time of continuous use temperature should not be higher than 90 degrees.
2. The surface of Acrylic Guide Plate plate has the same hardness as aluminum, so we should be careful to avoid scratches on the surface when used or processed by organic glass. If the department is carefully scratched, we can recover the original gloss surface by polishing it.
3, there is a slight scratch acrylic or caused by electrostatic adsorption of dust fuzzy or opaque acrylic plate can use dipped one percent of soap and water in conjunction with the soft cloth to wipe clean.
4, acrylic plate assembly process should pay attention to have heat bilges cold shrink factor of acrylic, so at the time of installation in the assembly need to be taken into account when must leave scale suitable space clearance.
I believe that all the friends who have used Acrylic Guide Plate know that acrylic products have anti-corrosion, high temperature resistance and high transparency. They are also known as the "mother of crystal". So, do you know about the maintenance of the Acrylic Guide Plate board? When it comes to maintenance, there must be a lot of people who think about some of the maintenance we make in our daily lives. You may also be wondering: what does this have to do with us? Here comes the question.
It is believed that all things in the world are life long, and in good things, if they do not take care of it, they will gradually lose their luster. So, before the problem happens, we don't have to do the prevention work ahead of time. In order to help solve such problems, tianelong advertising company has conducted a series of tests based on years of experience. The results are very good, and I will share with you the following:
The first point:
The first is the cleaning of Acrylic Guide Plate plate; Because the transmittance of Acrylic Guide Plate plate is generally above 92%, in order to maintain its original luster, we must use special cleaning agent when cleaning, and pay attention to the concentration not too high; Because the concentration is too high, the passage of time will lead to an acrylic surface layer of the lose luster, so the best approach is to use concentration is approximately 1% of soap and water as a clean, this can not only save money wasted, and can keep the acrylic color constant, kill two birds with one stone.
The second point:
The retention of Acrylic Guide Plate temperature; Although it is said that Acrylic Guide Plate plate is very high temperature resistant function, but also not long to put it in the hot sun, and the colder position; Because acrylic material after such overloaded environment, will severely damage, so the heat bilges cold shrink is which come of, so the best temperature should be kept at 80% to 90% for the best.
The third point:
Location of Acrylic Guide Plate plate; You should know that there are some advantages and disadvantages to everything, such as organic solvents, which are the phase grams of Acrylic Guide Plates. Because, acrylic is a kind of chemicals called methyl methacrylate (mma) and, because both contain certain chemical composition, if often put together, will make the miscibility, in that case, is very big to the harm of acrylic plate; Therefore, it is necessary to avoid the use of Acrylic Guide Plate plate to contact such products.
