Introduction&Application Of LGP Panel

Aug 18, 2021

1. Light guide plate product introduction:

      1. Light guide plate production process: The light guide plate production process includes laser dotting, screen printing, injection molding, silk-free printing, etc. At present, the most widely used and the highest uniformity of light efficiency belongs to the dot-type light guide plate. In order to meet customer needs, the company adopts imported Italian laser dotting machine and Taiwan imported screen printing machine, and is determined to make LED light guide lighting perfect.

     2. The thickness of the light guide plate: 0.5/1/2/3/4/5/6/8/10/12mm. Different industry fields, the thickness of the light guide plate for different products is different, our company can tailor it according to customer product requirements Various thicknesses and sizes can be customized.

     3. Light-inlet mode of the light guide plate: It is divided into 1 side light-in, 2 side light-in, 3 side light-in and 4 side light-in. The commonly used ones are unilateral and bilateral, and the triangular light guide plate is generally three-sided. Round and square high-brightness light guide plates generally receive light from four sides.

     4. Light guide plate material: The materials used in the production of light guide plate are PMMA acrylic, PS, MS. At present, the most commonly used is the PMMA acrylic material with the highest light transmittance and the highest temperature and pressure resistance. PMMA acrylic is divided into Cast acrylic, extruded acrylic, our company uses Mitsubishi cast acrylic for laser dots, and uses brand-new acrylics such as Chi Mei for screen printing.




Second, the light guide plate application:

     1. Panel light lighting field: conventional large panel lights have sizes of 600*600, 1200*600, 1200*300, and various large panel lights such as φ450, φ800, and small panel lights have sizes of 3, 4, 5, and 6 , 8 inches, the following panel light pictures and pictures of supporting light guide plates supplied by our company:


      2. Table lamp lighting field: There is no fixed size in the field of table lamp. Each manufacturer has different sizes according to product design. Like the light guide plate of panel light, it is also divided into two schemes: round and square. The light guide plate of table lamp needs to be pasted on the dot surface. Reflective paper, paste a layer of diffusion film on the light-emitting surface, which can fully ensure that the product emits evenly, as shown in the following figure:



      3. Backlight field: The light guide plate is widely used in the field of backlight, like mobile phone displays, various button displays, most electronic product displays are inseparable from the backlight display, and its structure is very similar to desk lamp applications. The following pattern examples are used in conjunction with a layer of reflective film and a layer of diffusion film:


      4. Advertising light box backlight field: Light guide plate is also widely used in advertising light box field. It belongs to high-end application due to the soft brightness of the side light and uniform visual effect. Of course, the cost of this application method is higher than that of ordinary light boxes. Many, their size is much larger than that of the lighting light guide plate. They are generally non-standard customization. The general size of the lighting and backlight field is below 1200mm, and the advertising light box often has a size of more than 2000mm, or even more than 3000mm. I The company’s laser dotting equipment is specially used to produce this type of light guide plate. The use case is as follows:


      5. The field of light guide lighting for special-shaped lamps: The application of light guide plates in this field mainly needs to combine the creativity of the lamp designer, a good imagination, and the needs of the market to create a unique product, which may be explosive for customers. For this type of project, our company has professional designers responsible for docking, combining strong forces, and jointly leading the market. Examples of patterns are as follows:


     6. Brand logo indication area: traditional logos are displayed through patterns. When the light guide plate appears, designers have more space in this area, making our display effect more three-dimensional, more humane, and more beautiful


You Might Also Like