Development Of Ultra-thin And Large-size Laser Light Guide Plates
Jul 05, 2022
At present, the basic problem of light guide technology on the market in China are 2mm, 3mm and 4mm mostly, because the thickness of the Chinese laser light guide plate and for the light effect also has a certain impact, such as light guide plate thicker words can output the light to carry out the intensity is higher, and vice versa cultural output of light is lower. Light guide plate using optical grade acrylic / PC plate, and then with a very high refractive index and does not absorb light high-tech materials, in the optical grade acrylic plate bottom with laser engraving, V-shaped cross grid engraving, UV screen printing technology printed on the light guide point. Automotive LOGO guide plate combined with different acrylic materials, different ways of use, both uniform and unified laser dot layout, but also according to the different specifications and ways of use, do different sizes of dot layout. To do a perfect unity of common use and specificity. Refrigerator light guide can use any light source, point line light source to do the conversion of surface light source, light sources including LEDCCFL (cold cathode lamp tube), fluorescent tubes, etc..

However, with the development of ultra-thin products, many manufacturers began to study the use of the thinnest light guide to obtain the best light efficiency, which is a great challenge to the traditional screen printing process.
Traditional screen printing, basically need to open the mold test, the design of the point arrangement is difficult, while the laser light guide outlet flexible design not only saves the cost of the mold can also be from the size of the mold, which is directly tested a great advantage, not only flexible, the biggest advantage is in the face of cost savings.







