Maintaining the Light-Guiding Panel Lightbox: Things to Note

Sep 29, 2022

The light-guiding panel lightbox is an important part of a number of lighting systems. It is crucial to keep it well-maintained in order to ensure that it continues to function properly. In this blog post, we will discuss some things that should be taken into consideration when caring for the light-guiding panel lightbox.

2367b141f9c838d05bea88fe7affa41

Cleaning method

LED motion lightboxes can be seen everywhere in life, adding a lot of scenery to the city at night. But if the lightbox is used for a long time, it will have a certain stain and need to clean it. So how to clean the LED motion lightbox?

1. using a cotton cloth dipped in alcohol can clean dust, fingerprints, and other stains.

2. the alcohol needs to be dried after drying, otherwise, the light guide will leave behind moisture, resulting in bright spots after contact with reflective materials or screens.

3. with 1% soapy water, use a cotton cloth dipped in soapy water to remove the dust.

4. After removing the protective film, avoid touching the light guide with wet or sweaty hands;

Light guide plate surface scratch treatment common sense:

1. shallower scratches can be wiped with alcohol to diminish the scratching effect.

2. Deep scratches can be polished with an electric roller [cloth roller], which is a common method for acrylic products

Attention

In the process of using a light guide plate, need to be properly cleaned and maintained, especially the light box must be cleaned regularly, so as to ensure that its luminous effect can better evacuate heat to avoid burning out the lamp. So pay attention to the following matters to carry out the correct maintenance, in order to be able to better use it and avoid any failure problems.

1. Pay attention to the need for good protection measures

Cleaning light guide plate lightbox should use soft textiles with alcohol after gently wiping, and note that you can not use sharp instruments for related operations to avoid scratching the product, so in any operation can not be careless. At the same time, efficient and professional light guide manufacturers are reminded that the installation and transportation process should be very careful and do a good job of adequate protection because the light guide plate is relatively fragile, otherwise, it is easy to cause shattering so avoid it. In addition, if we want the product to play a greater role, then we need to note in the process of using do not let any other substance on its surface, so as to avoid affecting its strength or making it show different colors. And when we're done using it, we also need to clean it up and put it away properly. Only in this way can we make it easier for us to use next time and play a greater role.

2. Pay attention to the details

Light guide plate polishing needs to carefully observe whether there are chips or dust residue in the cut, otherwise, it will affect the light guide effect. Light guide plate manufacturers stressed that especially the outer packaging must be good and to completely wrap the light guide plate, can not have any omissions, so as not to meet the place where the problem of damage occurs, and to focus on the back reflective paper such as the overall packaging with the lamp, so as to ensure better light guide effect.

3. Pay attention to good test work

In the cleaning of the light guide plate after the completion of the test, the light source used must be regular brand products, this is because the brightness of the light source and color and other factors will affect whether the light guide effect is good or bad. Relevant light guide experts suggest that the light guide plate length should be relatively long, such as the test lamp is obviously shorter than the light guide plate, and the long part should also be sealed with silver-plated tape edge mouth.

The above is the light guide plate lightbox maintenance to pay attention to several matters, in addition to test and discriminating when the naked eye is afraid that it is difficult to complete such work, so the quality assurance of the light guide plate manufacturers recommend the use of illuminance meter for testing in order to obtain accurate results. And should be responsible for arranging special personnel to check every once in a while to ensure that the maintenance requirements can be met to ensure a clean and tidy enough environment and so on.




You Might Also Like