Backlight classification
Sep 16, 2021
Introduction to the device
The LCD is a non-luminous display device, which requires the use of a backlight source to achieve the display function. The performance of the backlight source will directly affect the display quality of the LCD. The cost of the backlight source accounts for 3-5% of the LCD module, and the power consumed accounts for 75% of the module. It can be said to be a very important part of the LCD module. Components. High-definition, large-size LCDs must be matched with high-performance backlight technology. Therefore, as the LCD industry strives to open up new application areas, the high-performance backlight technology (such as high brightness, low cost, low power consumption) It also plays the role of behind-the-scenes heroes.
Light source composition
is mainly composed of light source, light guide plate, optical film, plastic frame, etc. The backlight has the characteristics of high brightness, long life and uniform light emission. At present, there are mainly three types of backlight sources: EL, CCFL and LED, which can be divided into edge-lit type and direct-lit type according to different light source distribution positions. As LCD modules continue to develop in the direction of being brighter, lighter, and thinner, edge-lit CCFL backlights have become the mainstream of current backlight development.
Electroluminescence (EL) backlight body is thin and light, providing uniform light. Its power consumption is very low, the required working voltage is 80~100Vac, the inverter that provides the working voltage can transform the input of 5/12/24Vdc into AC output. However, the EL backlight has a limited service life (the average service life is 3000-5000 hours under the condition of 50% brightness, and the service life will be greatly shortened at a higher brightness level). Therefore, the ideal inverter for EL back lighting The device allows the output voltage and frequency to increase with the aging of the EL bulb, thereby prolonging the effective life of the display using the EL back-illuminated light source. SupeSite/X-Space official site
Usage
EL back lighting is more suitable for small reflective LCD applications such as watches, digital desk clocks and monochrome PDAs that require extremely weak lighting for use in dim or dim light conditions. However, low efficiency, low brightness, and short lifetime make it unsuitable for transmissive back lighting applications such as large LCDs required for laptop computers and flat-panel desktop monitors.
The service life of LED backlight is longer than EL (more than 5000 hours), and it uses DC voltage. It is usually applied to small monochrome displays, such as telephones, remote controls, microwave ovens, air conditioners, instrumentation, stereo audio equipment, etc. However, its brightness is currently not enough to provide a back light source for large transmissive displays. The structure of the LED backlight and the CCFL backlight are basically the same. The main difference is that the LED is a point light source, while the CCFL is a line light source.
0 Small Cold Cathode Fluorescent Lamp (CCFL) provides the brightness and lifetime (and light control capability) required for large LCDs, which is why it is still the most commonly used method of backlighting. However, heat accumulation is a concern.







