What Is Acrylic Heat Bending?

The completion of the production of an acrylic product is a system of work, is composed of many processes a complete acrylic product, some acrylic products in order to make some unique shape, there are often some places need to bend, some have curvature bending, or directly bent to a certain angle.

First, the material is imported or domestic, the thickness of the material, etc., because these are the basis for the correct adjustment of the baking bending method.

Second, adjust the temperature of the oven, which is very important. There are many people think that the plexiglass will be casually heated anyway on the line. In fact, not, without the right medicine, scientific adjustment is not a good product, acrylic to how much temperature? How thick the board to adjust how many degrees? How much time to bake? And so on is a rule, combined with the actual, not arbitrary. In addition, it is best to have a preheating process, to take graded heating steps. Because if the temperature from the beginning to keep too high for a long time, acrylic will not be able to withstand, it is not heated on the inside, but the exterior has been high temperature blistering.

Third, it is hot bending and bending after the treatment and operation, this step is also very important. We have to do a variety of preparations before the heat bending, the tools to be used are ready. To observe whether the softness of acrylic is suitable, try to complete the baking bend at once. In the process of bending must master the strength, mold to fine. The last link is the cooling, which depends on the degree of quality you require the product to determine the way, in short, sharp cooling is not a constant temperature and gradually cool the quality of good.