What to pay attention to in the maintenance of the light-guiding panel light box

In the process of using the light guide, proper cleaning and maintenance is needed especially for the light box which must be cleaned regularly to ensure that its luminous effect can better evacuate the heat to avoid burning out the lamp. So pay attention to the following matters to carry out the correct maintenance, in order to be able to better use it and avoid any failure problems.

What matters should be noted for the maintenance of the light-guiding panel light box

A, pay attention to do a good job of protection measures

When cleaning the ultra-thin light guide box should use soft textiles with alcohol after gently wipe, and to note that you can not use sharp instruments for related operations to avoid scratching the product, so in any operation can not be careless. At the same time efficient and professional light guide manufacturers reminded that in the installation and transport process should be very careful and do a good job of adequate protection, because? to avoid the light guide plate lamp is relatively fragile, otherwise it is easy to cause shattering so to avoid for it.

Second, pay attention to pay attention to details

Guide light board polishing need to carefully observe whether the incision has chips or dust residue, otherwise it will affect the light guide effect. Light guide plate manufacturers stressed that especially the outer packaging must be good and to completely wrap the light guide plate, can not have any omissions, so as not to meet the place where the damage occurred, and to pay attention to the back reflective paper such as the overall packaging with the lamp, so as to ensure a better light guide effect.

Three, pay attention to do a good job of testing

In the cleaning of the light guide plate after completion also need to test, which the light source used must be regular brand products, this is because the light source generated by the brightness and colour and other factors will affect the light guide effect good or bad. The relevant light guide experts suggest that the light guide plate length should be relatively long, such as the test lamp is obviously shorter than the light guide plate, its long part should also be sealed with silver-plated tape edge mouth.

The above is the light guide plate light box maintenance to pay attention to a few matters, in addition to testing and discriminating when the naked eye is afraid that it is difficult to complete such work, so the quality assurance of the light guide plate manufacturers recommend the use of illuminance meter for testing in order to be able to obtain accurate results. And should arrange for special personnel responsible for checking every once in a while to ensure that the maintenance requirements can be met to ensure that the environment is clean and tidy enough, etc.