What are the installation and operation steps of the light guide plate?

In the neon-colored modern society, lighting does not only represent the role of lighting, but is often used for decoration.

So at this time, it needs to be applied to the light guide plate, which can not only play a role in lighting, but also make the light more symmetrical and save electricity for us.

However, when you are using the light guide plate, you must master the following important points so that you can better play the effect.

First of all, it is necessary to avoid surface scratches, because the surface of the light guide plate is very soft, and the surface hardness of the light guide plate is equivalent to that of the aluminum surface, so it must be paid attention to during the construction and installation process. It is necessary to take protective measures in this regard to prevent deformation.

Second, since the light guide plate and ordinary plastic have the same expansion coefficient, there will be a certain expansion and contraction change when the temperature rises, so it must be considered during installation to allow for thermal expansion and contraction.

The third point, which is the most important point, must keep the environment clean and tidy. The light guide plate has relatively high requirements on the surrounding environment during the installation process. Most of the time, related operations need to be carried out in the clean room. Also, be sure to wear appropriate protective equipment.

If you don't need to install it, don't rush to unpack it. If it has been disassembled, you should assemble it immediately, so as to effectively avoid dust pollution.