UGR anti-glare diffuser is smaller than 16-19 diffuser?
Oct 16, 2021
Anti-glare diffuser manufacturers Acrylic diffusers are widely used in the field of lighting due to their obvious comprehensive performance advantages, mainly reflected in LED flat light panels, LED downlights, grille lights, ceiling lamp masks, and advertising light boxes, signs and signs, etc. Product.
1. As the most stable optical resin for diffuser, PC has a very wide range of applications and market demand. The production technology of PC raw materials is in the hands of international oligarchs. The price of PC raw materials is 2-4 times that of general plastics. High cost affects market promotion. Fortunately, domestic PC raw materials have gradually started.
2. LED lamps have only been in development for more than ten years. Except for the requirements and standards in the field of transportation facilities and public safety, LED products have not standardized and popularized the concepts of service life and safety, and there is no high standard. PC diffusers are standard as high-quality light sources. It is also difficult to promote.
3. As an optical grade resin, PC has high requirements on processing technology. Generally, plate manufacturers do not have technology accumulation and reserves, and do not have production capacity. The market supply of PC diffusers also has a certain bottleneck.
Acrylic diffuser production background: in the process of LED lighting lamps gradually being accepted by the market, the problem of LED lamp masks has been plagued by lamp manufacturers. It is necessary to have high light transmittance as a prerequisite, and at the same time to have Equivalent light diffusivity and good concealment of light sources, improving the effect of lamps and turning LED dazzling light sources into soft and healthy light sources are the research directions currently being researched by R&D personnel. At first, glass was used for the lampshade, but the glass was not fragile, and the light diffusion effect was not very good, which made it difficult to meet the lighting requirements. Later, it gradually developed to use resin instead of glass, but if you only use transparent resin as the lampshade, although the light transmittance is high, it can basically reach more than 90%, but the light diffusion effect is not ideal, and the concealment of the light source is poor. The white resin has too low light transmittance, which seriously affects the lighting of the LED lamp. In this case, technical means such as adding milky white pigments and surface frosting aids are used. Although this solves the problem of light source occlusion, it also has too low light transmittance, which seriously affects the light effect of LED lighting. Therefore, the problem of diffusion masks has been plagued by the penetration. The luminous efficiency and the shading of the light source are in such a contradictory problem. In this context, diffusion materials based on acrylic (PMMA), PS, and PC plastic sheets have emerged.
Before understanding the diffusion principle of the diffuser plate, you must first know two principles, one is the principle of reflection, and the other is the principle of refraction. Then the reflection principle is: when light is emitted from one medium to the smooth interface of another medium, part of the light is reflected by the interface, and the other part of the light passes through the interface and refracts in another medium. The incident angle of the light is equal to the reflection angle, and the reflected light and the incident light are on both sides of the normal in the same plane. The principle of refraction is: the refracted light lies in the plane of the incident light and the normal, the refracted light and the incident light are on both sides of the normal, and the ratio of the incident angle to the sine of the refraction angle is a constant. Diffusion plates based on this principle can be widely used in liquid crystal displays, LED lighting and imaging display systems.
For UGR diffuser manufacturers in a suitable comfortable range, generally less than 19, the following is some introduction about UGR.
The original industrial and civil lighting design standards stipulate that the direct glare of indoor general lighting is limited according to the brightness limit curve. This limitation method is only for the glare of a single lamp, and cannot represent the total glare effect of all lamps in the room. Therefore, CIE proposed a unified glare value (UGR) calculation formula on the basis of comprehensive glare calculation formulas in various countries. It is suitable for the general lighting design of simple cube-shaped rooms. The lamps are arranged evenly and equidistantly. The lamps are double symmetrical. The observation position is generally at the midpoint of the vertical and horizontal walls, and the line of sight is horizontal to the front.
The following methods can be used to prevent or reduce light curtain reflection and reflection glare:
1 Avoid installing lamps in interference areas;
2 Use low-gloss surface decoration materials;
3 Limit the brightness of lamps;
The UGR binning experience of the anti-glare diffuser UGR19 light diffuser! UGR is a numerical value to express the indoor unpleasant glare caused by lighting. Different UGRs have different comfort levels and different applications. Then we will give examples of several commonly used UGR values.
UGR13, just feel uncomfortable; the lighting effect is glare, the light curtain reflection is small, making the ceiling darker, giving a gloomy effect; this is mainly used in computer rooms and monitoring rooms.
UGR16-19, just acceptable, in the boundary of comfort and discomfort; effective control of glare, light curtain reflection, is the choice for comfortable office work; mainly used in ordinary, high-end office library reading rooms, hospitals, school buildings and other occasions .
UGR22, just uncomfortable; the lighting space is full of vitality, but the glare and light curtain reflection attract people's attention; it is generally used for commercial building lighting and business halls.
The UGR value is divided into seven levels: 28, 25, 22, 19, 16, 13, 10, etc. Each level has a different feeling. Therefore, when choosing a different level of UGR light diffuser according to the actual application,
Generally choose UGR19 light diffuser for better comfort.







