Method for non-bubble sticking technology of acrylic processed products

1. Acrylic sheets will leave marks that are difficult to remove when they are attacked by adhesives. Therefore, it is possible to protect the parts that do not need to be adhered by means of stickers.

2, indoor humidity, temperature, etc. will have a direct impact on the bonding of acrylic products;

3. Acrylic products bonded with adhesives before being completely cured, exposure to direct sunlight for a long time will cause different degrees of yellowing of acrylic products, which will seriously affect the aesthetics of acrylic products;

4, the direct blowing will make the edge of the sticky section whitish due to the rapid evaporation of the adhesive;

5, grease, dust or bubble holes will hinder the uniform application of the adhesive to leave air bubbles, can be removed by cleaning;

6. Excessive use of a small amount of adhesive will not completely slow the surface to be adhered, or bring air into the adhesive when it cures and shrinks, which affects the appearance;

7. The stress on the surface of the acrylic processing board and the surface stress and degradation caused by the cutting tool will affect the bonding effect of the acrylic sheet