light guide plate introduction

The Edgelight light guide design principle is derived from the Note Book's LCD screen, which is a high-tech product that transforms the line source into a surface light source. The light guide plate is based on the optical grade acrylic, using the backlight module technology of the LCD display and the notebook computer. Through the full light transmittance of the light guide point, the light guide plate is refracted into a surface light source through the computer to the light guide point design. Both are made in a light state. The product adopts the principle of spectral analysis combined with pulse laser engraving technology and V-Cutting scribing technology and is made under constant temperature, constant humidity and dust-free environment conditions. It has ultra-thin super bright, uniform light guiding, energy saving and environmental protection, no dark area. ,

The installation and maintenance are simple and fast and other distinctive features.

working principle

      The reflection points near the light source on both sides of the light guide plate are finely rounded and spaced apart (the point where the laser energy is melted is small and the distance is relatively distant), and the reflection point in the middle of the light guide plate is tightly thick and slightly elliptical (melted by laser energy) The point is tight and wide). When light enters the light guide plate from the two side light sources and hits the reflection point, it diffuses and reflects to the surface of the light guide plate; the other part is that the light directly penetrates the light guide plate to reach the surface. The closer to the light guide plate of the light source, the stronger the direct light is, the weaker the distance is; on the other hand, the reflection point close to the light source is small and alienated, and the diffused light is less, and the farther and tighter away from the light source. The light reflected from the dots is richer. These lights are complexly combined to achieve the effect that the entire light guide plate is bright.