LED counter light installation needs to pay attention to
Jul 05, 2018
What should you pay attention to when installing LED counter lights?
1, can not be stressed.
2. Do not damage the cable on the board when connecting.
3, the product is placed on the ground to drag, so as not to scratch or damage the outer casing to affect the appearance.
4. Please pay attention to the electricity standard when the product is energized. It is necessary to connect the kitchen cabinet lamp according to the positive and negative poles in order to avoid damage to the kitchen cabinet lamp.
5. When there are a large number of cabinet lights, please ensure that the cabinet lights are connected in parallel with the power supply. If the series is too long, the unbalanced voltage drop will cause the brightness of the front and rear ends of the cabinet lights to be different. It is recommended not to exceed 4 meters as a series unit. Please ensure that the maximum power of each channel is within the maximum power of the adapter.
6. When mounted on a metal or other conductive surface, an electrical isolation layer must be provided to insulate the mounting surface from the lamp.
7. When installing the kitchen cabinet light, you should pay attention to the surface electrostatic protection.
8. Since the surface of the kitchen cabinet lamp is a smooth aluminum alloy, please ensure that the product is in a normal environment.
9. Replacement and repair must be done after the power is cut off to prevent short circuit. After troubleshooting, the components should be properly replaced to ensure that the electrical and structural requirements are met.
10. This product is not waterproof, do not use it outdoors and rain, and the lamp should be reinforced at the installation.
11, environmental requirements:
Working temperature -20～+40°C Storage temperature -30～+60°C Operating humidity 30%～85% Storage humidity 10%～90%
12. Storage environment:
Indoor, ventilated, there should be no corrosive gas in the air
How to choose the color of the counter light bar?
The counter light strips are divided into LED flexible strips and LED hard strips. Nowadays, LED strips are usually used for decoration to facilitate the renovation and demolition of counters. The general counter strips are based on the displayed products and LED lights. The color of the bar should be selected in response to the effect of the promotion.
The color of the LED strip is that as the temperature rises to a certain extent, the color begins to change gradually from deep red - light red - orange yellow - white - blue.
The color temperature is below 3300K, and the light color is reddish to give a warm feeling; there is a steady atmosphere, a warm feeling, and it is called warm color temperature. Can be used for gold, jade, colored gemstone counter lighting.
The color temperature is in the middle of 3000--6000K. There is no obvious visual psychological effect in this color tone, and there is a refreshing feeling; so it is called "neutral" color temperature. Can be used for silver, white jade, amber, clothing, leather and other counter lighting.
The color temperature is over 6000K, and the light color is blue, giving people a feeling of coldness, which is called cool color temperature. Suitable for counter lighting such as diamonds, crystals, watches, etc.
To choose different color temperatures according to your own products, you can achieve the effect of the color of the light bar, and highlight the product. Therefore, be careful in the choice of counter light strips.
