Laser engraving acrylic light guide plate

The laser engraving light guide plate is a light source conversion product with the function of converting the side light source into a surface light source. The laser light guide plate adopts the imported optical micro-acrylic material, has uniform light transmission, soft light, no light leakage, no dark area, and the light transmittance is up to More than 90%, high weather resistance, no yellowing, laser engraving and dot, durable. Good results can be achieved with efficient reflective film and diffuser.

Jinyao Optoelectronics and Germany's advanced laser companies have proposed a new design method for the light guide plate. The complete light guide dot distribution function can produce various shapes of dots according to customer needs, which is in line with various process requirements. The test data shows that the laser light guide plate can achieve high performance with a uniformity of more than 88%.

Need to pay attention to the installation of laser light guide:

1. The storage should be stacked horizontally, and it should not be tilted for a long time or placed on the concave and convex surface.

2. It is recommended to use electrostatic precipitator to remove dust and IPA (isopropyl alcohol) to clean the surface before assembly to avoid black and white spots.

3. Avoid using double-sided tape and various types of glue in the light.

4. During the installation process, workers must wear powder-free latex gloves (to avoid sweat and fingerprints) and masks (to avoid saliva spray between the light guide plate and the reflector and diffuser).

5. The product has smudges that can be cleaned with IPA (isopropyl alcohol) to ensure that it is completely dry after cleaning.