Features of light guide panels and design study options
May 23, 2022
Features
Can be cut to any size required or used for splicing, simple process and easy to make.
Light conversion rate (higher than 30% of conventional panels), with uniform light, indoor long life can be used normally more than 8 years, safe and environmentally friendly, durable and reliable for all suitable indoor and outdoor;
The same floor area for luminous brightness in general, high luminous efficiency and low power consumption.
It can be made into different shapes, such as circle, ellipse, arc, triangle, etc. Automotive LOGO light guide plate combined with different acrylic materials, different ways of use, both uniform and unified laser dot layout can be used, but also according to different specifications and ways of use, do different sizes of dot layout. LED light guides are made by filling a closed mould with molten forming material at high pressure, which requires the light guide to be synchronised with the microstructure in the injection moulding, while the mould must be made quite robust and therefore expensive, and must therefore be produced in large quantities to offset the high cost of the mould. Single-sided microstructured arrays of light guides are generally produced using an injection moulding process and can have a textured bottom structure in the form of a tiny lens, a micro sphere or a tetrahedral angular cone prism. Table lamp light guide plate light conversion rate is high (more than 30% higher than traditional plate), uniform light, long life indoor can be normal use more than 8 years, safe environmental protection, durable and reliable indoor and outdoor can be applied.
the same brightness in general, can save business costs by using thinner products.
Can be converted by using none of the light sources, point line light sources do surface light sources, light sources mainly include LEDCCFL (cold cathode lamp tube), fluorescent tubes, etc.
Design solutions
The laser dot programme has the following characteristics.
1 Different combinations of acrylic-like materials are used in different ways, both by uniform laser unified network layout and also by making the network layout of different sizes according to different specifications and ways. In order to achieve the perfect unity of universal and special performance.
2, guide light more uniformly, uniformity up to 90% or even through above.
3, around the effective use of dense reflective points, "saros" with large functional intermediate points, without dark streaks and "black holes". You can also produce special effects.
