Analysis of light guide plate characteristics
Dec 13, 2021
The light guide panel uses an optical grade acrylic sheet to absorb the light emitted from the lamp and stays on the surface of the optical grade acrylic sheet. When the light hits each light guide point, the reflected light will diffuse in all angles, and then destroy the reflection conditions. The light guide plate is emitted from the front of the light guide plate of the manufacturer. Through various light guide points of light guide plate manufacturers of different density and different sizes, the light guide plate can emit light evenly. The purpose of the reflective sheet is to reflect the light exposed on the bottom surface back into the light guide plate to improve the efficiency of light use.
It can be cut to the required size at will, and can also be spliced and used. The process is simple and the production is convenient; the light conversion rate is high (more than 30% higher than the traditional board), the light is uniform, and the life is long. It can be used normally for more than 8 years in the room, safe and environmentally friendly. , Durable and reliable, applicable both indoors and outdoors;
In the case of the same area of luminous brightness, the luminous efficiency is high, and the power consumption is low;
Can be made into special shapes, such as circles, ellipses, arcs, triangles, etc.;
In the case of the same brightness, thinner products can be used to save costs;
Light guide plate manufacturers can use any light source, point-line light source for surface light source conversion, light source including LEDCCFL (cold cathode lamp), fluorescent tube, etc.
