37.6INCH LCD Display Open Cell RV376FBB-N00 For Bus

Rina Technology Co., Ltd. is one of the leading manufacturers and suppliers of 37.6inch lcd display open cell rv376fbb-n00 for bus in China. Welcome to wholesale durable products in stock here and get quotation from our factory. All customized products are with high quality and low price.

 

Product Description

The RV376FBB-N10 is a color active matrix TFT LCD open cell that uses amorphous silicon TFTs (Thin Film Transistors) as an active switching device. This open cell has a 37.6-inch diagonally measured active area with FHD resolutions (1920 horizontal by 540 vertical pixel arrays). Each pixel is divided into RED, GREEN, and BLUE dots which are arranged in vertical stripes and this module can display 16.7M colors. The TFT-LCD panel is adapted to a low reflection and higher color type. Additionally, the RV376FBB-N10 has a built-in LED driver with an LED backlight unit for power saving which is placed around the edge of the panel. The average power consumption of the LCD panel is 4.0W at operating mode conditions: Ta=25℃, VCC=3.3V, 1/fH=1/fV=60Hz, and the system integrated circuit is disabled condition. This power consumption can be lowered by using PWM (Pulse Width Modulation) control to dim the backlight LEDs. With these various functions, the RV376FBB-N10 meets the demands of high-image quality visuals in industrial equipment monitors and public information displays.

The features of the LCD display open cell

⚫ LVDS interface with 2-pixel/clock

⚫ High-speed response

⚫ Low color shift image quality

⚫ 8-bit color depth, display 16.7M colors

⚫ Wide viewing angle

⚫ DE (Data Enable) only mode

⚫ ADS technology is applied for high-display quality

⚫ RoHS compliant 

 

Parameter	Specification	Unit	Remarks
Active area	919.296(H) × 258.552(V)	mm
Number of pixels	1920(H) × 540(V)	pixels
Pixel pitch	159.6× 478.8	μm
Pixel arrangement	Pixels RGB Vertical stripe
Display colors	16.7M	colors	8bits True
Display model	Normally Black
Dimensional（panel）	934.896(H) × 271.052(V)	mm	Detail refers to drawing
Weight	0.81± 0.05	kg	With BOE TCON board
Power consumption	2.4W	watt	Typ.
Surface treatment	Haze 1%, 3H

The packaging

 

 The Application of the LCD display open cell

The size of the LCD display open cell

Operating Precautions 

• Do not connect or disconnect the cable to/from the Module at the “Power On” Condition.

• When the module is operating, do not lose CLK, and ENAB signals. If any one of these signals is lost, the module would be damaged.

• Obey the supply voltage sequence. If the wrong sequence is applied, the module would be damaged.

• Do not allow to adjust the adjustable resistance or switch

• The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.

• The LCD modules use C-MOS LSI drivers, so customers are recommended that any unused input terminal would be connected to Vdd or Vss, do not input any signals before power is turned on, and ground your body, work/assembly area, assembly equipment to protect against static electricity.

• Do not exceed the absolute maximum rating value. (supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise,  the Module may be damaged.

• Module has high-frequency circuits. Sufficient suppression of electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize interference.

• Design the length of cable to connect between the connector for the back-light and the converter as shorter as possible and the shorter cable shall be connected directly, The long cable between the back-light and Converter may cause the Luminance of the LED to lower and need a higher startup voltage.

• The cables should be as short as possible between System Board and the PCB interface.

• Connectors are precision devices to transmit electrical signals, and operators should plug in parallel.

• Be careful about condensation at sudden temperature changes. Condensation makes damage to the polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. 

 

Shipping

FAQ

 

1. What is the operating temperature of the LCD displays?  

The operating temperature is -30ºC -+80ºC for the LCD displays.

 

2. Can you give me an LCD display open-cell sample order?

Of course, we accept sample orders.

 

3. What kinds of payment methods do you accept?

 T/T bank transfer, West Union and Paypal.

 

4. Can I customize the LCD display open cell size that I need?

The size custom needs to contract with our Professional business staff, the size can be cut from large to small, unable to cut large, you can choose from the sizes we have and communicate with our staff, and they will give you a professional program as well as advice.

5. Whether the specification of the LCD display open cell is A gauge?
YES, if the quality is below A gauge, we do not do it.

Hot Tags: 37.6inch lcd display open cell rv376fbb-n00 for bus suppliers, factory, customized, price, in stock, outdoor lcd display panel, digital signage lcd advertising display, lcd digital advertising display, advertising display screen price, outdoor lcd display for sale, lcd advertising screen